BUILDING MATERIAL

We deliver an extensive range of building material testing services to our clients. Laboratory provides accurate results on time. We analyze the quality of building materials for the following major products:

Led by passionate experts

Testing of the products is carried out using IS, ASTM, ISO, DIN, BS, RDSO or any other International Standards.

Coarse Aggregates
Bricks (Burnt clay bricks, Fly ash brick, Pulverized fuel bricks)
Fine Aggregate /Sand
Admixture
Ceramic, vitrified Tiles (Glazed or Unglazed)
Micro Silica/Silica Fume,
Mortar
POP/Gypsum Building plaster
Adhesives for Use with Ceramic Tile
Bitumen,PMB, CRMB& NRMB
Bitumen Emulsion
Bitumen Felt
Bitumen Mix Material (BM/DBM/BC)
Cement (OPC/PPC/PSC)
Hydraulic and Composite cement

Cement Concrete Flooring Tiles
Chequered Cement Concrete Tile
AAC Block
Paver block
Grout (GP-2)
Thermal Insulating Material
Gypsum Plain and laminated plaster board
Hardened Concrete
Stones (Kerb stones, Granite, Kota stones etc.)
Paving Bitumen.
APP/PVC/HDPE water proofing materials
Water Proofing Compounds etc.

-

We offer following product tests as per IS, MORTH, CPWD, AASTHO, ASTM, BS, DIN or any other International standard for Building Material Products:

Tests -

Bricks - Dimensions, Water absorption, Compressive strength and Efflorescence etc.
Cement - Compressive Strength, Consistency, Density,Drying Shrinkage, Final & Initial setting time, Fineness of Blain Air Permeability, Soundness, Aluminium as Al2O3, Calcium oxide, chloride, insoluble residue, Iron as Fe2O3, Loss on ignition, Magnesium oxide, silica, sulphur etc.
TILES - Dimensions, Flatness,Perpendicularity, Resistance to wear,Straightness, Thickness of wearing layer,Water Absorption, Wet Transverse Strength, Breaking Strength, MOR, Scratch Hardness, Abrasion Resistance, resistance to staining, resistance to acid/alkali, resistance to household chemical etc.
Aggregate (Fine & Coarse) - Sieve analysis, Bulk Density,Clay Lumps, coal & lignite, combined flakiness and elongation index, Crushing value,Impact Value, Flakiness Index, Soundness, Water absorption, 10% Fine Value,Silt content etc.
Fly Ash - Comparative compressive strength, Drying Shrinkage, Fineness of Blaineness Air permeability, lime reactivity,retained on 75 micron IS sieves, Soundness, specific gravity etc
AAC Block - Dimensions,Block density,Compressive Strength, Thermal Conductivity test etc.

Paving Block-Dimensions,Abrasion Resistance,Compressive strength, Flexural Strength, Tensile Splitting Strength, Freeze Thaw Durability, etc.
Tile Adhesive-Tensile adhesion strength, Shear adhesion strength, Slip resistance,Deformity,Open time and adjustability etc.
Bitumen - Penetration,Absolute and kinematic viscosity, Softening point, Flash Point, Solubility in trichloroethylene,Density,Ductility, Elastic Recovery etc.
Hardened Concrete (cube, core, beam) - Compressive strength, Flexural Strength, Tensile Strength, Chloride,Sulphates, potassium oxide,Ratio of Ingredients, Rapid chloride ion permeability test (RCPT), Concrete permeability, Pull out test etc.
Bitumen Mix Material (BM, DBM, BC, SDBC) - Bitumen Content, combined elongation and flakiness, Flow value, Impact Test, Los angles abrasion, Marshal Stability, Stripping Value,Theoretical maximum Specific gravity,Density etc.

-

Indian testing laboratory also conducts the

JOB MIX FORMULA of GSB, WMM,BM,DBM,BC,SDBC&BITUMEN MASTIC

Design Mix - Complete Design Mix Facilities available for M-10, M-15, M-20, M-25, M-30, M-35, M-40, M-45, M-50, M-55 etc.

-

Indian testing laboratory also conducting a wide range of Non Destructive (NDT) testing on site -

Core Cutting
Dry Density of soil by sand replacement method
Carbonation test
Pull-out test

Plate Load Test
SPT Test
Rebound hammer
Ultrasonic Pulse Velocity test.

Science Research WP Theme

Services

BUILDING MATERIAL

Led by passionate experts

-

Tests -

-

Indian testing laboratory also conducts the

-

Indian testing laboratory also conducting a wide range of Non Destructive (NDT) testing on site -

Subscribe To Our Newsletter